Shipping Across Canada & the USA

In Stock Items - Ready to Ship!

Machine Mount & Coupler Guide

The machine mount is the mechanical link between the carrier and the hydraulic drive. It must match both the carrier/coupler and the drive family. A correct drive with the wrong mount is still an unusable system.

Fastest path: send us the carrier make/model, coupler type and drive model.

Find Equipment for My Machine

Machine-Specific Excavator Mounts

Rev-Pile carries mounts for several common excavator systems, including Bobcat X-Change, Kubota quick attach, Deere machines and CAT pin-grabber configurations. These mounts are selected from the carrier/coupler and the drive size they are intended to support.

Pin-Grabber Mounts

Pin-grabber systems are commonly identified by pin diameter and machine/coupler geometry. Rev-Pile stocks CAT-style bolt-on mounts with 30 mm, 35 mm, 40 mm, 45 mm and 50 mm pin options for compatible 9K-16K drive installations.

Do not select a mount from pin diameter alone. Verify the carrier/coupler geometry and the drive family before ordering.

Bobcat X-Change & Kubota Quick Attach

Machine-specific quick-attach mounts simplify installation when the carrier uses a known coupler system. Rev-Pile currently carries Bobcat X-Change and several Kubota quick-attach mount configurations.

Skid-Steer Telescopic Mounts

Telescopic skid-steer mounts can improve working height and positioning for drilling and screw-pile installation. Rev-Pile carries TPE 7K and TPE 16K telescopic mount families for compatible Digga drive ranges.

Mount Capacity Must Match the Drive

A mount intended for a smaller drive family should not automatically be assumed suitable for a larger drive. The drive torque, gearbox mass and reaction loads all matter. Match the mount to the intended drive family and carrier.

What to Send Rev-Pile

  • Carrier make, model and year if known
  • Coupler / quick-attach system
  • Pin diameters and geometry where applicable
  • Drive model or torque class
  • Whether the drive will use a standard hood or gimbal
  • Photos of the coupler or existing attachment if identification is uncertain

Shop Machine Mounts   |   Have Rev-Pile Verify the Mount